Attendance details
This chapter is for programs where you mark each student present or absent. Once a student is present, the ATTENDANCE DETAILS screen turns that mark into a complete record. Depending on your program it asks for time in and time out, a subject, a teacher, student engagement, a topic and rating, and optionally an assessment and a session reflection.
The student list
Section titled “The student list”Once a session is created, or you open one from the SESSIONS tab, you land on its list of students. The bar at the top reads SESSION followed by the session’s short code, with the date and time underneath. The page can take a few seconds to load on a slow connection, so give it a moment before assuming something is wrong.
Present and absent Ava, Emma and Liam are present. Ella and Noah are absent, and the plus sign on their rows means no reason is recorded yet.
Marking students present or absent
Section titled “Marking students present or absent”Each student’s row has a switch on the right. Switch it on to mark that student present. Leave it off to mark them absent. There is no separate “absent” button: a switch left off is how a student is recorded as absent.
The switch turns teal when it’s on and stays red when it’s off, but you don’t have to rely on the color. An on switch has its knob on the right, and the present count above the list goes up by one each time you switch someone on.
For example, with Emma Johnson, Liam Walker and Ava Thompson in the session, you might switch on Liam’s and Ava’s rows and leave Emma’s off if she isn’t there.
Controls above the list
Section titled “Controls above the list”- The present count: a people icon with a number. It shows how many students are marked present, and changes as soon as you flip a switch.
- The eye icon switches between showing everyone and showing only present students. When the eye is crossed out, absent students are hidden. Tap it again to bring them back.
- Add Student brings in a student who wasn’t part of the original group, while the session is still open.
- The switch at the right end of this row marks everyone present in one go. It’s only there before your first save of the session. Once you’ve saved the list, it’s gone for good, so use it at the start if you want it.
Some programs also show a collapsible Attendance Defaults panel above the list. It shows the details you set when you created the session, such as time, subject and student engagement. When you save, they are applied to every present student who doesn’t have details of their own yet. Its info button says the same and reminds you to tap a student’s name to change that student’s details.
Giving a reason for an absent student
Section titled “Giving a reason for an absent student”In programs that offer one, you can record why a student was absent. The reason is optional in every program: the list saves with or without it.
Each absent student’s row carries a small marker in its top-right corner, above the switch. A note icon (a small clipboard with two lines on it) means a reason is saved. A plus sign (+) means none is saved yet. A present student’s row has no marker. For example, Noah Bennett is absent and his row shows a plus sign. Ella Carter is absent too, but her reason is saved, so her row shows the note icon.
- Save the list first. If you changed a switch since your last save, tapping a row shows
Please save attendance details first.and nothing opens. After a save, absent students are hidden, so tap the eye icon to bring them back. - Tap the absent student’s row. An ATTENDANCE DETAILS screen opens with one box, Select reason for absence.
- Tap the box. A list of reasons opens, each with a short description, for example Students Forgot / Confused, Scheduling Conflict and Tech / Connectivity Issues. Scroll for more. Other stays at the bottom of the list.
- Tap the reason that fits. If none does, tap Other and type the reason in the box. To go back to the list, tap the list icon inside the box.
- Tap Save Attendance Details at the bottom. You return to the student list, and that student’s marker changes from a plus sign to the note icon.
Pick a reason Choose from the list, or tap Other to type your own.
Note icon or plus sign Ella’s reason is saved (note icon). Noah has none yet (plus sign).
The completion line
Section titled “The completion line”Above the list, a line reads Session Completion: <percent>% - <x> of <y> present students, with a progress bar and an info icon that explains it in more detail. It updates as soon as you switch students on or off.
On a narrow screen the line wraps onto a second line, so it always reads 3 of 3 present students in full. For example, with Liam Walker and Ava Thompson switched on and their details filled in, it reads Session Completion: 100% - 2 of 2 present students. Some programs don’t show this line at all.
Under the progress bar:
- While present students still need details, you see
In order to complete this session, you need to enter session details for:and their names. - Once everything needed is filled in, you see
Great work! You have fulfilled all necessary data for this session.In some programs this goes on:Now you can save attendance details for this session.
Saving the list
Section titled “Saving the list”At the bottom of the screen, Save Attendance Details saves the whole list at once. A check mark appears in front of the label while it is ready to tap, and a grayed-out button has none. It reads Saving data... while the save is in progress.
An absent student with no reason saves fine. The reason is optional, so the list is never refused for a missing one.
If an absent student already has times recorded, for example because you set Ava Thompson’s times and then switched her off, a Warning box says those times will be cleared when you save and asks Continue? Tap No to go back, or Yes to save and clear them.
If the save fails because of a connection problem, an error banner appears, the screen stays as you left it and your changes are kept. Check your connection and tap Save Attendance Details again.
If a session can no longer be edited, there is no save button at all. See Sessions.
What changes after a successful save
Section titled “What changes after a successful save”There is no success message. Instead, the list changes:
- Only present students are shown. Absent students are hidden, and the eye icon is crossed out.
- The switch that marks everyone present disappears.
- If nobody is marked present, the screen closes after the save and you are back on the list of sessions. Open the session again to see the students.
You may also see an Info message saying that some students kept their existing reflection/engagement data. That means those students already had their own details, and the save left them as they were.
Opening a student’s own details
Section titled “Opening a student’s own details”Tap a present student’s row to open their own details, described next. In programs that offer a reason, tapping an absent student’s row opens the shorter reason form described above.
If you have unsaved changes on the list, tapping a present student’s row, or an absent student’s row in a program that offers a reason, shows a message reading Please save attendance details first. and nothing opens. Save the list first, then tap the row again. In programs with no reason, an absent student’s row never opens, so the same message appears even after a save.
Updating a present student’s details
Section titled “Updating a present student’s details”At the top of the screen is the student’s name with their grade in brackets, such as Ava Thompson (4), and their ID. Under Fill out attendance details form:, the fields depend on your program.
- Set Time IN and Time OUT: two dropdowns. The second also shows the length, such as
11:00 AM (60 minutes). - Choose the Subject: a dropdown, or in some programs a fixed value in a gray box, such as
Subject: Math. Choosing a subject is what unlocks the assessment bank list. - Depending on your program, also fill in these fields:
- Teacher: a dropdown you tap to choose a name, such as Ms Brooks. The X beside it clears it (in some programs it asks first: Yes clears, No keeps). When it’s empty, a + lets you add a teacher.
- Student Engagement.
- Topic and Rating, in programs that use topics.
- Optionally tap Add Assessment, under
Do you want to add an assessment?. See Assessments. In the assessment banks, a bank with a filled title bar already has an assessment for this student, and the Assessment Type and Grade filters narrow a long list. - Some programs also show Grade Standard Level under
Do you want to add session reflection?. See Session reflections. - Tap Save Attendance Details at the bottom of the screen. You return to the student list, with this student’s row updated.
Fill in everything the screen asks for, even a field that doesn’t look urgent. Some fields don’t warn you that they’re missing until you save, so the surest way to avoid a refused save is to leave nothing blank.
The form One student’s details. The fields you see depend on your program.
Banks Each card shows the type, grade and maximum score. Tap one to open it.
If the save is refused
Section titled “If the save is refused”If something required is missing, nothing is saved. A red Submit Error banner appears at the top, and the empty field shows Field is empty underneath it. Fill in that field and tap Save Attendance Details again.
Submit Error The teacher was left empty, so the save was refused.
- Connection problem. An error banner says
Connection error. Please check your internet connection or server.You stay on the screen and what you entered is kept. Once your connection is back, tap Save Attendance Details again. - Topic and Rating are empty even though you chose them when you created the session. Choose them again here before saving. Until they’re filled in, tapping Save Attendance Details does nothing except show
Field is emptyunder them. - A dropdown (such as Teacher) doesn’t take your tap, and the box stays empty after you tap a name. Tap the same name again. If a dropdown briefly shows as a plain shaded bar right after you open it, wait a moment before tapping.
Leaving with unsaved changes
Section titled “Leaving with unsaved changes”If you try to leave a screen with changes that haven’t been saved, a Warning box appears. On the student list it reads Looks like you have unsaved changes. followed by Leave without saving? On a student’s own screen the first line may instead read Make sure to fill all required fields before leaving. or Attendance data must be saved first, followed by the same question.
The two buttons are Stay and Leave. There is no Cancel.
Staykeeps you on the screen with your edits still in place. This is the safe answer.Leavegoes back and discards your unsaved changes.
Read that one carefully before tapping. Leave is the answer that loses work. For example, you picked a time for Liam Walker and tapped the back arrow before saving: Stay keeps his time on screen, and Leave throws it away.
In some programs, Make sure to fill all required fields before leaving. appears even when you’ve only opened a student’s screen and changed nothing, because a required field is still empty. If you didn’t change anything, Leave loses nothing. Tap Stay instead if you’d like to fill in the empty field first.
To leave a student’s screen without the warning, save first, then use the back arrow at the top or your phone’s own back button to return to the student list.
Where to go next
Section titled “Where to go next”Attendance details feed the rest of the session. When the list is saved and every present student has what your program needs, go on to Session reflections or finish the session in Sessions.