Sessions
A session is one block of teaching time: who taught, at which school, which students were there, for how long, and on what subject. Everything else in Presentify hangs off it.
You reach sessions from the Assignments screen. Tap a class, and at the top you see three tabs: SESSIONS, STUDENTS and GROUPS, usually with SESSIONS already selected. If it opens on STUDENTS with This view is not supported for the selected options., tap SESSIONS. If you can’t see GROUPS, it may be cut off at the right edge. Slide the row of tabs sideways to bring it into view. Tapping a tab scrolls the row only as far as needed to show that tab in full.
Open, Locked and Ended
Section titled “Open, Locked and Ended”Once a class has at least one session, the SESSIONS tab has three tabs of its own: Open, Locked and Ended, each with a count. It always opens on Open. The tab a session is in decides what you can still change.
| Status | What it means |
|---|---|
| Open | A new session starts here. You can fill in and change everything. Its card counts down, for example OPEN: 23:47:12 (hours : minutes : seconds, so OPEN: 04:32:10 means four and a half hours left, not four minutes). When everything your program asks for is in, the card reads COMPLETED: 100%. |
| Locked | Not finished when the time ran out. It can no longer be edited. A session sitting at 90% at the deadline locks at 90%. What you saved is kept; you can still open it and read it. |
| Ended | Completed and closed. Its card reads ENDED in the bottom-right corner. |
If a session seems to have disappeared, it has most likely moved. Tap Ended or Locked to find it. If it closed before you finished, ask whoever manages Presentify for your program to reopen it. You can’t reopen it yourself.
Each card shows the date and time, the short code, a COMPLETED bar and the status. If you mark each student, it also shows Present <x> of <y>. If you enter a number of students, it shows only that number. Tap the refresh button (two circling arrows) beside + to reload the list.
Marked one by one The card shows who was present out of the whole session.
A number entered The card shows only the number.
Starting a session
Section titled “Starting a session”Tap the + button on the SESSIONS tab. What happens next depends on your program: if you mark each student present or absent, you pick a group of students first. If you enter a number of students instead of names, you go straight to setting the time.
Empty list Tap + to create your first session.
Picking a group of students
Section titled “Picking a group of students”A screen titled SELECT STUDENT GROUP opens, with a full-width Continue Without a Group button and a row for each group. It shows how many groups you have.
- Tap a group that has students in it to go straight into setting up the session.
- Tap a group with no students in it and nothing happens. You may see
Please select a student group.even though you did tap one. It means that group is empty. Pick another, or add students from the GROUPS tab (see Student groups). - Tap Continue Without a Group to choose individual students. On SELECT STUDENTS, tick the students you want, for example Emma Johnson, Liam Walker and Ava Thompson, then tap Apply Changes (3). The number counts who you ticked.
If you have no groups, the screen reads No student groups available. and offers Check Groups page, which takes you to the GROUPS tab. If the group list doesn’t load, tap the single retry button (an icon, no wording) in the middle of the screen.
Pick a group Or tap Continue Without a Group to choose students one by one.
Setting the time
Section titled “Setting the time”The CREATE SESSION screen shows ASSIGNMENT: and your class’s short code. Under AVAILABLE TIME RANGE it shows the day and the earliest and latest times you can use.
- Start Time is already filled in with the first free time in the available range. That is the start of the range, or the end of an earlier session if one already uses the start. If times you choose overlap a session, you find out when you tap Start (see below). End Time reads
--:--until you set it. - Tap a Quick Durations button (30 min, 45 min, 60 min) to set the end in one tap. A button is grayed out if that length would run past the end of the class period. For any other length, tap End Time, choose a time from the list, then tap Confirm Selection.
- The Duration line confirms it. It reads
Duration: -until both times are set, then for exampleDuration: 1h 0m.
What else the screen asks for
Section titled “What else the screen asks for”Depending on your program, the screen asks for more. Match what you see on your own screen.
- A subject and a session reflection for each grade. Subject is a dropdown, and choosing one is optional. Once you pick it, a Session Reflection box appears for each grade. Setting Student Engagement is required before you can start. Details are in Session reflections.
- A topic and a subject. Topic is a box you type into. Select Subject works as above, and Select Student Engagement (required) must be set.
- A fixed subject and a teacher. The subject is already set, shown in a gray box such as
Subject Math, and you can’t change it. Teacher is a dropdown, or tap + beside it to add one. - A subject plus topics and ratings. Under Topics & Reflections, pick a topic and a rating for each topic you cover. When you tap Start, a box titled Topics can’t be edited later asks you to confirm; its Cancel and Save anyway buttons can take a moment to appear. Details are in Session reflections.
- Only the times. Nothing else is asked here. These are the programs where you enter a number of students.
Choose a teacher whenever one is offered. Some programs mark it * Required field and some don’t, but Start stays grayed out until a teacher is picked either way. If a Subject, Topic or Rating list opens nothing, go back and open CREATE SESSION again.
One version Set the time, then the fields your program adds.
Times only Set the time and tap Start.
Tapping Start
Section titled “Tapping Start”- Tap Start at the bottom right. It stays grayed out until both times are set and everything required has a value. When it is ready, a check mark appears in front of the word, so you can tell it from the grayed-out one without relying on color. While the session is created, it reads
Creating.... - A question may appear first, depending on your program:
No session reflection added. You can still add one for each student after the session is created.Tap Continue to create the session anyway, or Cancel to go back.
- The new session opens. If you mark each student, you land on the student list: see Attendance details. If you enter a number of students, you land on the FINISH SESSION form, described below.
If nothing happens right after you typed in a box such as Topic, tap Start a second time. The first tap can be ignored with no message.
Overlap The banner names the other session and its times.
Finishing a session
Section titled “Finishing a session”How you finish depends on your program.
If you mark each student
Section titled “If you mark each student”There is no separate finish step. Fill in the student list and tap Save Attendance Details; see Attendance details. A check mark appears in front of its label while it is ready to tap. You can save as many times as you like while the session is open. Switching a student on doesn’t save anything by itself.
If you leave with unsaved changes, the app asks Looks like you have unsaved changes. and then Leave without saving? Tap Stay to keep your edits. Leave goes back and discards them. There is no Cancel. For example, you switch Emma Johnson on and tap the back arrow before saving: Stay returns you to the list with her switch still on, and Leave drops it.
Stay or Leave Stay keeps your edits. Leave discards them.
If you enter a number of students
Section titled “If you enter a number of students”After you tap Start, a form titled FINISH SESSION and the session’s short code opens.
- Teacher: tap the dropdown and choose one, such as Mr Adams. The X beside it asks first (
You will need to select or add a teacher again.): Yes clears it, No keeps it. - Number of Students: type how many attended, such as
6. - Grades: choose one or more. If the list is still open when you tap Save, that first tap only closes the list; tap Save again.
- Subjects: choose one or more. Choosing Other opens a free-text field; separate several subjects with commas.
- Tap Save at the bottom right. A check mark appears in front of the word while it is ready to tap.
If you tap Cancel or go back while you have unsaved entries or a required box is empty, the same Leave without saving? question appears, with Stay and Leave.
You return to the SESSIONS tab with a message such as Session "SCPJ1461" updated successfully! Depending on your program, the subject may already be set at the top, with no Subjects box.
If you tap Save with a box empty, Field is empty appears under it. These messages can stay on screen after you fill the box in. If every box has a value, tap Save again and it goes through.
Ready to save Cancel and Save are at the bottom.
Looking at an ended session
Section titled “Looking at an ended session”You can open an ended or locked session to look at it, but nothing can be changed. When you come back, the list is on Open again, which may be empty. Tap Ended to return to it.
If you mark each student, the switches don’t move, there is no Save Attendance Details button, and, on an ended session, absent students are hidden until you tap the eye icon. Tapping a student opens their ATTENDANCE DETAILS read-only. The screen may still say Great work! … Now you can save attendance details for this session. There is nothing to save, so ignore that sentence. The completion line counts only present students, so it can read 2 of 2 present students while the card reads Present 2 of 3.
If you enter a number of students, you see a plain SESSION screen listing the teacher, number of students, grades and subjects, none of which can be changed.
Read only Details can be looked at, not changed.
Deleting a session
Section titled “Deleting a session”An open session created by mistake can be removed: tap the trash icon on its card in the Open tab. A box titled Delete Session reads Are you sure you want to delete this session? This action cannot be undone. Tap Delete to confirm or Cancel to keep it.
- If the session has assessments attached, a second warning says they will be deleted too. Cancel at either step leaves the session untouched.
- Locked and Ended sessions have no trash icon and cannot be deleted. Contact support instead (see Support).